70% Condition Used 20GP Shipping Container

 

This 70% condition used 20GP standard dry shipping container is made of weathering steel and has a generally complete structure. The doors, locking bars, corner castings, and side panels are largely intact, making it suitable for cargo storage, construction site equipment storage, temporary warehousing, and export loading.

Based on the container type code “22G1” visible in the photo, this container is a 20-foot general purpose dry container, also known as a 20GP Shipping Container. The exterior shows some fading, scratches, and localized rust, which are consistent with normal use of a second-hand ocean container. However, there are no obvious signs of major dents or severe structural deformation in the photo.

ONE BOX can arrange on-site inspection according to the customer’s intended use and can also provide container purchasing, trucking pickup, warehouse loading, export customs clearance, ocean booking, and inland delivery services at destination.

---

Product Information

Dimensions, tare weight, and payload may vary slightly depending on the production year and manufacturer. Final data should be confirmed based on the container door markings and CSC plate.

---

Condition of the Container in the Photo

Based on the current photo, this used 20GP container appears to have the following features:

1. The overall structure is basically intact

The side panels, roof rails, bottom side rails, and corner posts appear generally complete. No obvious severe twisting, cracking, or large impact deformation is visible in the photo.

2. Container doors and locking bars are complete

The double cargo doors, locking bars, handles, and hinges are visible, and the main door-locking components appear to be in place. Before purchase, it is recommended to further test whether the doors open and close smoothly and whether the door seals are aging.

3. Normal signs of use are visible on the surface

The container paint has faded to some extent, and some scratches, rust spots, and light corrosion can be seen in certain areas. These are common in second-hand shipping containers that have been used in ocean transport and usually do not directly affect storage use.

4. Localized rust should be checked

Localized rust is visible around the door edges, corner posts, and lower rail areas. Before final delivery, it is recommended to inspect whether this is only surface rust and to confirm there is no perforation, cracking, or serious corrosion affecting load-bearing performance.

5. Suitable as an economical storage container

This container is not in like-new appearance, but it still offers good practical value. It is suitable for customers who do not require a perfect appearance and care more about price and functionality.

---

What Does “70% Condition Used Container” Mean?

“70% condition” is a commonly used market description for the overall condition of a second-hand container. It does not mean the container has been used for a fixed number of years.

In general, a 70% condition used container usually has the following characteristics:

• The container structure is intact, without severe deformation;
• Doors, locking bars, and hinges are generally functional;
• The interior can usually remain windproof and rainproof;
• The surface shows fading, scratches, and localized rust;
• The floor has normal signs of use;
• The appearance is not as good as a one-trip container, but the cost is lower;
• After inspection, it can be used for storage or selected export purposes.

Because condition grading standards may vary from one supplier to another, customers should rely on actual photos, video inspection, and on-site checking when making a purchase decision.

---

Product Advantages

Cost-effective and practical

Compared with a brand-new one-trip container, a 70% condition used 20GP container costs less and is ideal for storage projects, construction site use, and small to medium-sized businesses with limited budgets.

Standard size

The 20GP is a globally standardized container size, making it easy to handle with trucks, cranes, ports, and warehouses. It is also more flexible for later transport and relocation.

Strong and durable

The container body is made of weathering steel and can withstand long-term outdoor use. With proper rust removal and touch-up painting, its service life can be extended further.

Windproof and rainproof

A used container in good condition can provide a relatively enclosed storage space for machinery, tools, furniture, building materials, and general cargo.

Easy to modify

A 20GP container can be modified with doors, windows, shelving, lighting, ventilation openings, air conditioning, insulation, and electrical systems, making it suitable for offices, equipment rooms, tool rooms, or mobile storage units.

---

Suitable Applications

Warehouse and factory storage

It can be used to store raw materials, packaging materials, machinery parts, tools, furniture, and general industrial products.

Construction sites

It is suitable for storing power tools, construction equipment, safety supplies, and temporary materials, helping reduce the risk of goods being exposed outdoors for a long time.

Farms and agricultural projects

It can be used as a storage space for agricultural machine parts, irrigation equipment, feed packaging, repair tools, and general farming supplies.

Export loading

Customers can buy a used 20GP container in China, load purchased goods into it directly, and then ship it by sea to the United States, Canada, Australia, New Zealand, Europe, and other countries.

Temporary commercial space

After modification, it can be used as a temporary office, kiosk, mobile studio, equipment control room, or small warehouse.

---

What Should You Check Before Buying?

When buying a used shipping container, you should not only focus on the exterior appearance. The following parts should also be inspected carefully.

Container structure

Check whether the roof rails, bottom rails, corner posts, and corner castings have serious impact damage, cracks, weld repairs, or structural deformation.

Door system

Test whether both doors can open and close properly, and check whether the locking bars, handles, hinges, and door seals are complete.

Roof leakage

Enter the container and close the doors, then check whether there are obvious light leaks from the roof, side panels, or welded joints. Light penetration usually indicates possible damage or rust holes.

Container floor

Inspect whether the wooden floor has rot, holes, severe oil contamination, chemical contamination, or large repair patches.

Bottom cross members

Check whether the understructure and cross members have severe rust, deformation, or fractures. The bottom structure directly affects the container’s load-bearing ability.

CSC plate

If the container is intended for international ocean export, it is necessary to confirm whether the CSC safety approval plate, inspection date, and overall container condition meet the requirements of the shipping line.

---

What Is the Difference Between a Storage Container and an Export Container?

If the container will only be placed at a factory, warehouse, farm, or construction site as a fixed storage unit, the main concerns are usually:

• Whether the container leaks;
• Whether the doors can close properly;
• Whether the floor is intact;
• Whether the container has severe rust perforation;
• Whether the bottom can be lifted safely.

If the container will be used for export loading, additional checks are required, such as:

• Whether the CSC plate is valid;
• Whether the container number and type code are clear;
• Whether the container is cargo-worthy;
• Whether the shipping line accepts shipper-owned containers;
• Whether the container can be declared properly for customs and terminal handling;
• Whether the destination country allows import of a customer-owned container.

Therefore, a used container for export usually requires more rigorous inspection than one intended only for storage.

---

Optional Repair and Refurbishment Services

ONE BOX can provide related repair or refurbishment services according to customer needs, including:

• Container cleaning;
• Interior sweeping and cleaning;
• Rust removal;
• Local repainting;
• Door adjustment;
• Door seal replacement;
• Locking bar and handle repair;
• Minor steel plate welding repairs;
• Partial floor repair;
• Container number and weight marking tidying.

The refurbishment level of a used container will affect the final price. Customers can choose to keep the original condition or request basic repairs or repainting according to project requirements.

---

ONE BOX Container Services

ONE BOX not only supplies used shipping containers, but can also help customers complete the full process from purchase to export transportation.

Stock matching

Recommend suitable available containers based on the customer’s city, required size, budget, and intended use.

Photo and video inspection

Provide photos of the exterior, doors, interior, floor, roof, and bottom rails. Video inspection can also be arranged when possible.

Pickup and trucking

Arrange trucking pickup from the depot and transport the container to the customer’s factory, supplier warehouse, or designated loading location.

Warehouse loading

If the customer has multiple suppliers in China, goods can first be consolidated at a warehouse and then loaded together into the purchased container.

Customs clearance and ocean freight

Assist with preparing export documents, completing customs clearance, making ocean bookings, and handling terminal gate-in operations.

Destination delivery

Depending on the destination conditions, assistance can be provided for customs clearance, trucking delivery, unloading, and ground placement of the container.

---

Purchasing Process

1. The customer provides the required container type, quantity, and place of use;
2. ONE BOX checks available stock at the local or nearby depot;
3. Photos, container number, condition details, and quotation are provided;
4. The customer confirms the condition and completes the purchase;
5. Repair, cleaning, or repainting is arranged if needed;
6. Trucking pickup and delivery are arranged;
7. If export is required, loading, customs clearance, and international transportation are arranged.

---

Frequently Asked Questions

How long can a 70% condition used 20GP container still be used?

Its service life depends on the original production year, rust condition, storage environment, and maintenance. With regular rust removal, repainting, and waterproof maintenance, it can usually continue to be used for storage for many years.

Is a used container guaranteed not to leak?

No. Leakage cannot be confirmed based on appearance alone. Before purchase, a light test or water spray test should be carried out to confirm whether there is any leakage risk at the roof, side panels, door gaps, or welded joints.

Can it be repainted into another color?

Yes. The container can be repainted in white, gray, blue, black, or other custom colors, and customer company names or markings can also be added.

Can this container be used directly for export loading?

It depends on the CSC plate, inspection validity, overall condition, and the shipping line’s acceptance requirements for shipper-owned containers. Not every storage-grade used container can be directly used for international ocean freight.

Can the container be delivered to our factory for loading?

Yes. ONE BOX can arrange trucking to deliver the empty container to your factory or warehouse, and after loading it can then be moved to the port for export.

Can I buy the container and ship cargo in it at the same time?

Yes. Customers can buy a container in China and load goods from Chinese suppliers into it, then export the whole container to the destination country.

---

Get a Quote for a 70% Condition Used 20GP Shipping Container

A 70% condition used 20GP shipping container is a practical choice for customers who want to control purchasing costs while still needing a reliable storage or transport unit. Since every used container has its own condition, the production year, color, rust level, floor condition, and repair history may all vary from one container to another.

When requesting a quotation, it is recommended to provide the following information:

• Required container quantity;
• Place of use or pickup port;
• Whether it will be used for storage or export shipping;
• Whether repainting is required;
• Whether trucking delivery is required;
• Whether cargo loading and export service are needed;
• Final destination country and city.

ONE BOX can provide one-stop service for used 20GP container purchasing, inspection, repair, trucking, loading, and export transportation.